Export of heavy polyethylene 3840 to Turkey

۱۰:۳۹
No Comments

Avangan Plast Industrial Complex and cooperation with Turkish producers.

Heavy polyethylene 3840 is produced by Tabriz and Arak Petrochemicals. This heavy polyethylene is used in production in a circular way

Rotational molding is one of the methods of producing plastic parts. Rotational molding is used to produce hollow parts in different shapes and sizes, such as liquid tanks, garbage containers, soccer balls, helmets, and even boat bodies. Rotational molding processes with molds A package that is filled with a certain amount of pore with thermoplastic material starts, the molds are either lost in advance or placed in a group and rotates on two axes at the same time. In some types, the mold rotates around one axis and around the other axis. tilts or oscillates, in any case, the molten material is spread as a uniform layer on the entire surface of the mold. In the next step, the mold enters the cooling zone, where the air is used to gradually reduce the temperature while moving. The solidification of the mold material is opened and the hollow part is taken out

Applications of heavy polyethylene grade 3840 Heavy polyethylene 3840 is used in the production of playground slides, large plastic tanks, etc. 3840 can be used in any product that can be used by rotational molding. The high sales of this product in the field of all items. It is rotationally molded.

Often rotationally molded with effective hardness Typical container tanks General information Good impact strength Excellent internal and external surface finish Whiteness Good resistance to stress due to cracking Stable against Storage should be in a dry, dust-free environment at temperatures below 50 degrees, exposure to direct sunlight should be avoided

Because this can lead to the loss of the product

Recycling and Environment The final products made from this polymer can be recycled, burned or disposed of without any harm to the environment. Using this recycling system, clean waste can be reused for many applications that are less demanding. and on the other hand, with sufficient correct and controlled combustion, preferably associated with heat or other energy recovery systems, the high calorific value of polyethylene contributes to the combustion of municipal solid waste.

It does not create destruction holes in landfill sites, it does not emit hazardous gases, or it does not cause groundwater pollution. If the pigments of other additives are included in the processing stage of this product, the above items are not fully valid.

Contact with food. The composition of the products is in accordance with the instructions for use and contact with food